2005 Hyundai Accent;With LEV1 LEV Specifications 1.6L;This part is CARB compliant. 2004 Hyundai Accent;With LEV1 LEV Specifications 1.6L;This part is CARB compliant.2003 Hyundai Accent;With LEV1 LEV Specifications 1.6L;This part is CARB compliant. 2002 Hyundai Accent;With LEV1 LEV Specifications 1.6L;This part is CARB compliant.
2001 Hyundai Accent;With LEV1 LEV Specifications 1.6L;This part is CARB compliant. Magnaflow Conv DF 01-05 Hyundai Accent 1.6L. When your catalytic converter requires replacement, you can install a factory-like unit that will let you pass a smog check, or you can install a Magnaflow converter that will pass the smog check and increase exhaust flow. If you want to be legal and get a performance increase, the choice is clear.They've also been producing catalytic converters for 30 years, so they've learned a thing or two along the way. All the exhaust flow knowledge they've accumulated has been packed into the design of this Direct Fit Catalytic Converter with Header. The heart of the Magnaflow converter is the monolithic ceramic honeycomb catalyst, which is specially designed for maximum exhaust flow and surface area. Magnaflow carefully controls the application of the precious metal catalyst to the honeycomb surface to prevent flow restriction or an emissions test failure. All Magnaflow converters have a -+'¥ lap joint where the neck meets the body, and the neck is formed so it doesn't extend into the converter body where it could hamper exhaust flow. Magnaflow also carefully matches the size of the inlet to the converter body, because putting a larger neck on a smaller body would reduce airflow. Besides incorporating features that increase exhaust flow for better performance, Magnaflow also builds their converters to last. The converter body is manufactured from heavy-duty stainless steel for maximum durability.
All converters are seam welded close to the converter body for a strong, tight bond, not along the edge, which would allow the converter to expand and let the catalyst move around. And the aluminized steel or stainless steel heat shield creates a rigid wall of protection against heat and adds to the structural stability of the converter. This Direct Fit Catalytic Converter is part of the exhaust header/manifold assembly, and replacement of the converter requires replacement of the entire assembly. The interface at the outlet will allow the assembly to be bolted into the exhaust system. No fabrication or modifications are usually required.This converter assembly is available in OBD II (On-Board Diagnostics, 2nd Generation) and Pre-OBD II configurations. Pre-OBD II is for early vehicles (generally 1995 or older), which were equipped with 2-way, 3-way, or 3-way with air injection converters. Two-way converters oxidize harmful Hydrocarbons (HC) and Carbon Monoxide (CO) along with secondary oxygen into water (H2O) and Carbon Dioxide (CO2). Along with the previously detailed conversion, a 3-way converter also reduces oxides of nitrogen (NOx) into Nitrogen (N2). The 3-way with air injection converter operates the same as a 3-way converter but with the addition of air pumped into the converter to improve the oxidation capabilities.
OBD II converters are for 1995 and newer vehicles and are 3-way converters. This is a special order item.
This is especially important for special order items that are made or assembled to order. Your address must be confirmed.Buyers who pay with unconfirmed addresses will not be accepted. We are following their policies and guidelines on how to protect the marketplace. Thank you for looking at our item, and we do hope to do business with you.
Professional installation on all products and items is highly recommended. If the message comes in as "I have a question about using my item" or a general / unspecified message, it is forwarded to the correct department which delays the process. Often times, it is too late by the time it gets to the appropriate department. Cancellations that are requested incorrectly can not be guaranteed. Some special order brands include but are not limited to: BC Racing, Brembo, CP Carillo, Cometic, Coverking, D2 Racing, JE, KW Suspensions, Oracle, SPEC, SPL.Quantity on hand is subject to change at any given time. Due to the rapid pace, we may not always have the physical stock. Many parts that change the performance of a vehicle are intended for off-road use only. All performance modifications and installations should be done at the owners own risk.
Fasster Motorsports holds no responsibility, either implied or otherwise for mechanical, electrical, or other failure when using any aftermarket performance products. By purchasing any aftermarket performance product, the customer takes full responsibility for any use, and/or misuse of the product and agrees that Fasster Motorsports holds no responsibility for any consequences, legal, or otherwise.
Fitment is usually listed right under the "Item Specs/Specifics section" This section is designated by separator image heading, often times this is a silver bar with text over carbon fiber. Listing titles are limited to 80 characters so occasionally years or models may be abbreviated or trimmed down / sub model or trim may not be included in the listing title.
Application Fitment: Please refer to the vehicle fitment or application outlined within the listing description itself. Fitment information is broken up into its own section and specifies what the item purchasing is designed or intended for. Any vehicle fitments above or outside of the listing description are to be considered obsolete and or incorrect. Any items in the photographs that are not mentioned in the listing description are not included. Actual products or packaging may vary.
Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution.